J'ai postulé en ligne. Le processus a pris plus d'une semaine. J'ai passé un entretien chez Analog Devices en janv. 2016
Entretien
The employer contacted me via mail. He provided a brief introduction about himself and topics that would be covered during the interview. We set up an interview date for the following week. The interview was pre-screening telephonic interview. Questions varied from general information questions to technical questions based on my course work
Questions d'entretien [1]
Question 1
1. A required current to be carried was provided. A metal with current density specification was provided. Asked to calculate metal width required to carry the specified current over a particular length to meet a particular voltage drop.
Follow up questions based on the above concept varying different parameters like current,length etc.
2. A basic current mirror set up. Asked about short channel effect for the devices in this set up. How the SCE impacted for these devices as current mirror ratio is changed. follow up questions on SCE.
3. Basics of source follower circuit.
4. questions regrding my course work.
J'ai postulé en ligne. J'ai passé un entretien chez Analog Devices
Entretien
2 Hour interview with other engineers, 1h with a senior and a junior , and the other 1h with two other engineers. A lot of technical questions, and they provide some circuits that you have to explain how they work .
J'ai postulé en ligne. Le processus a pris 1 semaine. J'ai passé un entretien chez Analog Devices (General Trias) en oct. 2025
Entretien
First the interviewer introduces himself and then asks you about your experiences, and projects. Other filtering questions such as availability were also asked. The last part were more about behavioral and the interviewer also gave me time to ask questions.
Questions d'entretien [1]
Question 1
I was shown an RC circuit. Basically, a first-order low pass filter. I was tasked with explaining it in my own terms.
Colloquio tecnico con le figure senior del team per il quale è aperta la posizione (3-4 colloqui da 1 ora) . Colloquio conoscitivo con il responsabile delle risorse umane. Viene generalmente fornito un feedback anche in caso di esito negativo. Dopo qualche settimana, in caso di esito positivo, viene ricevuta l'offerta lavorativa.
Questions d'entretien [1]
Question 1
Domande relative alla struttura di circuiti standard ( opamp, bandgap, amplificatori) e ai parametri di progetto ( offset, banda, stabilità). Analisi di suddetti circuiti ed eventualmente di aspetti correlati ( parassiti, layout, ecc ecc).