J'ai postulé en ligne. Le processus a pris 3 semaines. J'ai passé un entretien chez Broadcom (Irvine, CA) en mai 2014
Entretien
Met about 8 people, most of the questions were fairly straight forward. Be prepared to go through and explain what you have listed in your resume. There were some questions on Nyquist sampling and what you see at the output when the Nyquist sampling is violated.
Questions d'entretien [1]
Question 1
They asked about a common source amplifier with degeneration, what is the gain with and without the degeneration resistor. For the second part of the same question the drain and the gate were tied together.
J'ai postulé via une agence de recrutement. Le processus a pris 3 jours. J'ai passé un entretien chez Broadcom (Tel Aviv-Yafo) en sept. 2015
Entretien
very good, challenging. the interviewers seemed very skilled and professional, and the questions were not so common. when asked a question I recognized they tweaked it nicely and had me think more on what I already knew. I had 2 interviews in 3 days, which is nice and efficient, handled directly with the engineers and managers. met with 4 different persons. the chemistry between them seemed very good.
Questions d'entretien [3]
Question 1
divide by 3 SM, with some more talks on evaluating the machine
J'ai postulé en ligne. J'ai passé un entretien chez Broadcom (Bengaluru) en juin 2015
Entretien
7-8 rounds 1 to 1 discussions.
All are simple and basics questions. Interviewrs were helpful.
clock mix,gating questions were asked.
You need very good basics of rtl design,
Timing ,synthesis, cdc,resets,etc.
good concepts about setup hold
good concepts for cdc.
you may need to answer questions on some design problem.
Questions d'entretien [1]
Question 1
you may need to answer questions on some design problem.
J'ai postulé en ligne. Le processus a pris 3 semaines. J'ai passé un entretien chez Broadcom (North Andover, MA) en avr. 2015
Entretien
phone interview was based on resume and few general design questions.
During onsite interview mostly they want me to speak more about my projects and few questions on verilog coding, linux cmds and they explained about position responsibilities.